LED ON/OFF

Shine a Light on Innovation with EzloPi

Top Projects

LED ON/OFF with Push Button

DHT22 Temperature-Humidity Sensor

AC Lamp setup with relay and momentary switch

LED ON/OFF

The EzloPi smart devices provide automation through simple, customizable use with our open-source EzloPi platform, making daily life easier and improving human-machine interactions.

Before moving into this example, it is very important to know about the device registration, provisioning and converting the ESP32 device into an EzloPi device along with knowledge of Web Flasher, MiOS Mobile Application for Android/iOS and the MiOS Web Application.

1. About this example

This example demonstrates a simple circuit setup by using the EzloPi device, which provides a convenient platform for building IoT applications. With its built-in Wi-Fi and GPIO capabilities, it provides an ideal foundation for interfacing and controlling various peripherals, including LED’s.

In this example, we will see how we have interfaced and LED and how we can control the ON/OFF state of the LED using the EzloPi device.

2. Project Demonstration Video

Welcome to the project demonstration video section. The following video showcases the key aspects of LED ON/OFF, providing a visual walkthrough of its implementation.

Play Video

3. Circuit Diagram & Interface

The following components are required for interfacing the LED using the EzloPi device:

ESP32 as EzloPi smart device.
LED Light with a current-limiting resistor.

The wiring diagram is represented as follows:

The following connections are made to complete the entire circuit setup.

From ESP32 to the LED:

Connect the shorter leg (cathode) of the LED to the GND Pin of the ESP32.
Connect the longer leg (anode) of the LED via a current limiting resistor as shown in the diagram above to the IO4 pin of the ESP32.

4. Interfacing the LED with the Web Flasher

Set up your device/hardware by visiting config.ezlopi.com

Now click on the Connect Device button and a pop-up window will appear

Now, select the COM Port to which your ESP32 device is connected. In our case, the COM3 port is used.

Click Connect.

If you are new to this and it’s your first time configuring, select Create new Device ID and enter the Wifi SSID and Wifi Password.
Now, In the Device Configuration, tab click on Digital Output.

A digital output window will open for inputting the following parameters:

Set a device name of your choosing. In our case, we set it to LED.
Set Out GPIO to 4.
Set the Resistor to PULL UP.
Set the default value to low
Now Click the Apply button.
After clicking the apply button you can see a table of your settings in the device configuration tab.
Press the Flash Device button.

A window will appear on the bottom left side of the screen displaying “Please press BOOT button while flashing begins.”
Hold the BOOT button down until the next window appears on the bottom left side of the screen which says “Installation prepared. Please release the boot button now.”

Release the BOOT button from your ESP32 when this pop-up on the bottom right window appears.

After some time this popup will appear saying Device Flashed Successfully! This means that your device has been set up successfully.

5. MiOS App

You can download the MIOS Android app from the Google Play Store and Apple App Store.

After downloading the app, proceed to install the application and open it.

Using the MIOS mobile application, create a new Ezlo Cloud account using the sign-up option. If you already have an account, you may proceed to log in.

After successfully logging in, you will be able to see the number of controllers connected such as a lamp, fan, or any other device in the MiOS app. Tap on any controller of your desired ID.

You will be able to see the status of your controller whether it is online or offline. Access the device dashboard, and tap the device. The following view of the dashboard will appear:

After opening the dashboard, you will be able to see the tile of your connected device.

Here as you can see above, we can see the LED tile. When you tap on it, the LED can be switched ON or OFF and vice versa.

6. MiOS Web Application

As you can see in the above figure, the status of the device is indicated whether it is ON or OFF. Clicking on the device tile will toggle the state of the LED.