MQ2 LPG Gas Sensor

Smart Gas Detection for a safer tomorrow!

Top Projects

LED ON/OFF

LED ON/OFF with Push Button

DHT22 Temperature-Humidity Sensor

PIR Sensor

Potentiometer

LDR digital module

AC Lamp setup with relay and momentary switch

MQ2 LPG Gas Sensor

The EzloPi smart devices provide automation through simple, customizable use with our open-source EzloPi platform, making daily life easier and improving human-machine interactions.

Before moving into this example, it is very important to know about the device registration, provisioning and converting the ESP32 device into an EzloPi device along with knowledge of Web Flasher, MiOS Mobile Application for Android/iOS and the MiOS Web Application.

1. About this example

The following example demonstrates how the MQ2 LPG Gas Sensor is interfaced with the EzloPi device and how it is implemented.

The MQ2 LPG Gas Sensor is a popular gas detection module widely used in electronic projects and home automation systems. It is capable of detecting various gases, including LPG (liquefied petroleum gas), propane, methane, and other flammable gases. We can set the threshold values for gas concentration levels that trigger alerts or actions on the EzloPi device.

By interfacing the MQ2 LPG Gas Sensor with the EzloPi device, you can create a smart gas detection and safety system that helps protect against the dangers of gas leaks in various environments, from homes and offices to industrial facilities.

2. Circuit Diagram & Interface

The following components are required for interfacing with the EzloPi device:

ESP32 as an EzloPi smart device.
MQ2 LPG Gas Sensor.

The wiring diagram for the ESP32 30-pin is represented below:

The following connections are made to complete the entire circuit setup.

From ESP32 to the MQ2 LPG Sensor:

Connect Vin from the ESP32 to the VCC of the sensor.
Connect the GND from the ESP32 to the GND pin of the sensor.
Connect D33 from the ESP32 to the A0 Pin of the sensor.

3. Interfacing the MQ2 Gas sensor module using EzloPi Web Flasher

1. Set up your device/hardware by visiting config.ezlopi.com

Now, click on the Connect Device button and a pop-up window will appear.

Now, select the COM Port to which your ESP32 device is connected. In our case, the COM3 port is used.

Click Connect.

If you are new to this and it’s your first time configuring, select Create new Device ID. Enter Wifi SSID and Wifi Password.
In the Device Configuration, tab click on Other.

A window will open for inputting the following parameters:

Set a device name of your choosing. In our case, we set it to MQ2.
Set Device subtype to MQ2 LPG Gas Sensor.
Check the box of GPIO 1.
Set OUT GPIO 1 to 33.
Now Click the Apply button.
After clicking the apply button, you can see a table of your settings in the device configuration tab.
Press the Flash Device button.

A window will appear on the bottom right side of the screen displaying “Please press BOOT button while flashing begins.”

Hold the BOOT button down until the next window appears on the bottom right side of the screen which says “Installation prepared. Please release the boot button now.”

Release the BOOT button from your ESP32 when this pop-up on the bottom right window appears.

After some time, a popup will appear saying Device Flashed Successfully! This means that your device has been set up successfully.

4. MiOS App

You can download the MIOS Android app from the Google Play Store and Apple App Store.

After downloading the app, proceed to install the application and open it.

Using the MIOS mobile application, create a new Ezlo Cloud account using the sign-up option. If you already have an account, you may proceed to log in.

After successfully logging in, you will be able to see the number of controllers connected such as a lamp, fan, or any other device in the MiOS app. Tap on any controller of your desired ID:

You will be able to see the status of your controller whether it is online or offline. Access the device dashboard, and tap the device. The following view of the dashboard will appear:

After opening the MiOS mobile dashboard, you will be able to see the tile of your connected device. The MQ2 LPG Gas Sensor tile reflects the concentration readings of the LPG gas being detected by the sensor at that moment.

5. MiOS Web Application

After configuring the controller with the EzloPi web flasher, head to ezlogic.mios.com

Use the same credentials to log in that you used for configuring the controller with the web flasher.

After opening the MiOS web dashboard, you see the tile of your connected device. The MQ2 LPG Gas Sensor tile will reflect the concentration readings of the LPG gas.